Features and usages
To keep dishes hot before using.Some basic features:
Radiator resistance is a device that converts electricity into heat and achieves a certain temperature after a specific time.
Control box is designed to be disassembled for easy installation and warranty.
Fan has air convection function in the counter to help hot air radiate uniformly in the device
Standards B and C use stainless steel 304#4 and 201#4, respectively.
Countertop: stainless steel thickness 1.2
Undershelf and middle shelf: stainless steel thickness 1.0
Counter body and door: stainless steel thickness 0.8
Sliding door trolley: Stainless steel ball type has removable door to clean the counter
Stainless steel adjustable legs D38
Sliding door lock: imported stainless steel from Malaysia
Door handles: shaped stainless steel
Convection fan: imported tube fan (China)
Power switch: Jelco
Indicator light: Jelco
Dry resistance: Jelco
Temperature control: imported (EGO - Germany)
Total power: 1500W + 24W
Operating temperature: 40oC - 50oC.
Voltage: 220V / 50Hz / 1P + E.
Air flow: 6.8 (m3 / minute)
Noise level: 44 (dBA)
Care and safety
Dos and Don'ts
Do not turn on the switch if there is no resistor plate or there is water and dust in the compartment of counter.
Immediately turn off the switch; Do not adjust the temperature if detected, suspected of electric leakage.
Turn off the device when not in use:
Turn on the power switch to the OFF position.
Turn the mechanical temperature adjustment knob counterclockwise to the original OFF position (0oC)
Turn off Aptomat, or unplug the power, when the device is not working.
Packing and labelling
Wrapped with PE (polyethylene) and carton boxes. Sealed with nylon film to prevent dust and scratch.
Special cases: for the exported or long distance - transported products, being wrapped with paper board before being fixed in wooden frames.
Heated counter may be fabricated upon specific request.